shop-talk
[Top] [All Lists]

[Shop-talk] Rivets won't pop

Subject: [Shop-talk] Rivets won't pop
From: jdinnis at gmail.com (John Innis)
Date: Fri, 14 Jan 2011 13:54:15 -0600
References: <OF3F6226D9.B8EF87FD-ON85257818.00132D63-85257818.00153C83@mail.megageek.com> <SNT123-W4AB57CDBD1AF3C3054F40E1F30@phx.gbl> <AANLkTikowYnkJ5yj0ZOYk7Hyg8wBwWyVhxDZkFRpVCgm@mail.gmail.com> <788978.26692.qm@web82406.mail.mud.yahoo.com> <alpine.BSF.2.00.1101141356310.18895@itonami.pair.com>
Are you using the correct size rivet for the hole you drilled? (Or
conversely the correct size drill for the rivets you have).  These can
usually only tolerate a hole slightly larger than the diameter of the
rivet shank.

On Fri, Jan 14, 2011 at 1:10 PM, David Hillman
<hillman at planet-torque.com> wrote:
>   I spent a good chunk of last Friday and Saturday thrashing to get my
> racecar ready to go ice-racing last Sunday.  I made it, and we ran all six
> races, but torn it up a bit in the process.  Looks like I'm going to repeat
> that process tonight and tomorrow.
>
>   A lot of the thrashing resulted from rivets that wouldn't pop.  I have a
> standard Arrow rivet gun... (
> http://www.amazon.com/Arrow-RH200-Fastener-Riveter/dp/B00004Z2JG ) and used
> a lot of different sizes, both steel and aluminum, but I had the same
> problem with most of them.  The mandrel would break, but the blind end
> wouldn't expand enough to become larger than the hole.
>
>   At first, I thought they were just too cold, as I was working in my
> unheated ~30* garage.  I took all the rivets inside overnight, but had the
> same problem in the morning.
>
>   I have never had this happen before.  I used a wide-enough variety of
> rivets that I don't believe all of them could be defective.  I don't
> understand how a problem with the gun could cause this issue.  That only
> leaves operator error, which is possible, but how hard is it to squeeze the
> handle on a rivet gun?  I've riveted some of these same parts together
> before.
>
>   Anyone know what's going on here, before I waste another couple hours and
> a bunch of rivets?  Thanks.
>
> --
>  David Hillman
> _______________________________________________
>
> Shop-talk at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.96
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/shop-talk/jdinnis at gmail.com
>
>



--
=================================
= Never offend people with style when you   =
= can offend with substance --- Sam Brown  =
=================================

<Prev in Thread] Current Thread [Next in Thread>