shop-talk
[Top] [All Lists]

Re: [Shop-talk] Replacing a damaged helicoil

To: <shop-talk@autox.team.net>
Subject: Re: [Shop-talk] Replacing a damaged helicoil
From: "Eric J Russell" <ejrussell@mebtel.net>
Date: Fri, 25 Feb 2011 21:18:53 -0500
I have been able to remove them that way - if you can grab the *top* coil 
and twist it tighter so it releases its grip on the piece it is in, you can 
unwind/remove it.

Eric Russell
Mebane, NC
http://home.mebtel.net/~ejrussell
----- Original Message ----- 
Subject: Re: [Shop-talk] Replacing a damaged helicoil


>> Bend the end of the coil more and unscrew
>> it with a needle nose pliers?
>
> That has worked for me in the past, but as Pat said it needs to be the top
> of the Helicoil (so it tends to shrink while you unscrew it).  IMO 
> anything
> that tends to spread it (like an easy-out) will just lock it in place
> tighter.
>
> -- Randall
_______________________________________________

Shop-talk@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.96
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>