shop-talk
[Top] [All Lists]

Re: [Shop-talk] Pulsing brakes

To: "'Jack Brooks'" <jibjib@att.net>, <shop-talk@autox.team.net>
Subject: Re: [Shop-talk] Pulsing brakes
From: "Karl Vacek" <kvacek@ameritech.net>
Date: Thu, 23 Jun 2011 20:22:47 -0500
Last summer I needed a set of rotors and Brembos were backordered for
several months.  I ended up taking the Tire Rack salesman's recommendation
and bought a pair of Centric rotors, figuring that for the price I could use
them while I waited and throw them away when the Brembos came into stock.

They arrived the next day, they're beautiful, they come painted on the
non-friction surfaces (the paint is still shiny a year later), and had a
perfect non-directional pattern on the friction surfaces.  They were in
lefts and rights for better cooling too.  They're still on the car and doing
just fine, despite hard driving, splashing hot brakes into puddles, etc.
I'd buy them again - I don't see how they could be better.

Karl


-----Original Message-----
From: Jack Brooks
Subject: Re: [Shop-talk] Pulsing brakes

Good info on the Brembo's.

Jack

From: Wayne
Subject: Re: [Shop-talk] Pulsing brakes

Yeah, rotors are too cheap these days to mess with turning.

I will highly recommend the Brembo OEM replacement rotors you can get from
Tire Rack and elsewhere.  Really fantastic product:

* competitively priced.
* Super flat, minimal run out, apparently blanchard ground.  NOT the lathe
turned concentric grooved finish cheap rotors have.
* factory balanced -- have clip on weights or drill outs to balance.
* NOT coated with oil or Cosmoline goop that requires a whole can of solvent
+ labor per rotor to remove
* don't seem to rust as badly on the non-swept surface as others.
_______________________________________________

Shop-talk@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.96
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>