Ummm, yeah. I read that too. I've had a part sealed in a baggie with 92%
isopropyl since Saturday evening, but no obvious softening yet...
Thanks though !
Karl
-----Original Message-----
From: Lee Daniels
Subject: Re: [Shop-talk] Removing hardening-type Permatex No. 1
> "Permatex says isopropyl alcohol works on cured material..."
You might need to heed the second sentence from the Permatex tech data
sheet:
"The product can be removed from metal surfaces with isopropyl alcohol. If
the sealant has been dried for a long time or at high temperatures, cover
the sealant with alcohol and allow to soften overnight."
- Lee
_______________________________________________
Shop-talk@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.96
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|