shop-talk
[Top] [All Lists]

[Shop-talk] Hub dust cover removal

Subject: [Shop-talk] Hub dust cover removal
From: scott.hall.personal at gmail.com (Scott Hall)
Date: Sun, 8 Apr 2012 16:00:11 -0400
References: <CAK73_u5bf4uAZt4MjN+6Ad86mCzV892fsYuG3Knr=hKwxSnHdw@mail.gmail.com> <CAK73_u7nqoArQg7HNoE5Rwop+NwJm16Qm75QMGD_s1F6sp=p=w@mail.gmail.com>
I bought one of those cheap Harbor Freight trailers. Need to install the
wheels. I can't get the dust covers off the hubs to bolt on the wheels.  If
I clamp onto the covers with channel locks I can spin it, but I can't get
anything between the lip of the cover and the hub. Is there some trick to
this before I punch a hole in them and pry them off?

Thanks in advance.

Scott

<Prev in Thread] Current Thread [Next in Thread>