Re: [Shop-talk] Silicone brake fluid

[John Miller via Shop-talk <shop-talk@autox.team.net>]

On 5/16/2020 8:46 AM, Eric Russell via Shop-talk wrote:
> I would clean them out. It may not be required but now would be the best 
> & (only?) opportunity.

Now that they've taken rubber-safe chlorinated brake cleaner off the 
market, you have to buy Lectra-Clean
> 
> Alternatively, suggest the use of DOT 4. It is 'regular' brake fluid 
> (even though the label on the can will likely say "synthetic") with a 
> higher boiling point than DOT 3. And it'd be totally compatible with DOT 3.

I have a hard time understanding why one would want to use silicone.

There's DOT 4, DOT 5.1 (which is not silicone) and now DOT 4+ which 
combines the temperature ratings of DOT 5.1 with the viscosity of DOT 4.

John.
_______________________________________________

Shop-talk@autox.team.net
Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net/archive