Sounds like time for a bigger snake.Â How about the combo of:
plus a bigger tip for it:
About $200 for the set.
And if that doesn't work there are places to get an array of tipsÂ
Mark Miller 707-490-5834
On 5/16/2020 2:05 PM, email@example.com wrote:
> Today's Topics:
> 1. The road goes on forever, the plumbing never ends
> (Mark J Bradakis)
> Message: 1
> Date: Sat, 16 May 2020 14:57:03 -0600
> From: Mark J Bradakis <firstname.lastname@example.org>
> To: "Shopemail@example.com" <firstname.lastname@example.org>
> Subject: [Shop-talk] The road goes on forever, the plumbing never ends
> Message-ID: <email@example.com>
> Content-Type: text/plain; charset="utf-8"; Format="flowed"
> I may not be that handsome, but I'm fairly handy around the house.?
> Kitchen sink drain clogged up again.? It has been a continual problem.?
> Basically it involves about 15 feet of drain pipe that has about a
> quarter inch drop over the run.? Well, maybe more than that, but not
> much more.? I made it a lot easier many years ago by putting in a T
> fitting in a spot easy to get to, so I no longer need to snake the
> entire length by taking apart the pipes at the sink.
> The drain pipe is 2" internal diameter.? The corkscrew on the end of the
> snake might be 3/8" in diameter. It bores a pretty small hole in the
> gunk clogging the pipe, so it doesn't take long to clog again.? I don't
> think there are any small, handhelp drain snakes with really big tips on
> them, capable of cleaning the entire inside diameter of the pipe.? I
> have seen these at the hardware stores made for bigger, heavier
> machines.? Not something I want to hold head high while working on the
> I was thinking maybe I could fab up a steel rod.? One end would have a
> hole the size of the snake coil, the other end a slot with a grub screw
> to fit the Brass Craft ends.? Seems simple.? I wonder it the snake coil
> is weldable, or at least brazable?? I'd hate to have it fail by breaking
> off as soon as any force is applied, i. e. the cutter hits the clog.?
> Having a chunk of steel lodged a few feet into the pipe would make
> subsequent snaking problematic. Would my plan work?
> Such fun having to clean drains right after the falling tree mess and
> the muffler blowing out on my Blazer.? Does May, or for that matter 2020
> have a reset - do over button?
Suggested annual donation $12.96
Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net/archive