--===============2141529244465818957==
--000000000000dcba2a05a7d11836
I bought a 12 by 20 Rhino shelter and this is what I did (maybe Overkill as
well).
Made a frame out of pressure treated 4 x 4 with 2 by 4s, 24-inch on
center.
Attached everything with timberlok screws.
Filled it in with 3/4 inch stone and bought a 8 inch square tamper to tamp
the stone down to be level with the frame. Did this tamping effort several
times adding Stone where required.
Then I stapled thick plastic sheeting over the whole shebang.
Three-quarter inch exterior plywood was then screwed into the
pressure-treated frame. It's pretty bomb-proof.
I did my best to level the terrain prior to construction of the foundation.
--000000000000dcba2a05a7d11836
Content-Transfer-Encoding: quoted-printable
<div dir=3D"auto">I bought a 12 by 20 Rhino shelter and this is what I did =
(maybe Overkill as well).<div dir=3D"auto">=C2=A0Made a frame out of pressu=
re treated 4 x 4 with 2 by 4s, 24-inch on center.=C2=A0</div><div dir=3D"au=
to">Attached everything with timberlok screws.</div><div dir=3D"auto">=C2=
=A0Filled it in with 3/4 inch stone and bought a 8 inch square tamper to ta=
mp the stone down to be level with the frame. Did this tamping effort sever=
al times adding Stone where required.=C2=A0</div><div dir=3D"auto">Then I s=
tapled thick plastic sheeting over the whole shebang.=C2=A0</div><div dir=
=3D"auto">Three-quarter inch exterior plywood was then screwed into the pre=
ssure-treated frame. It's pretty bomb-proof.=C2=A0</div><div dir=3D"aut=
o">I did my best to level the terrain prior to construction of the foundati=
on.</div></div>
--000000000000dcba2a05a7d11836--
--===============2141529244465818957==
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
_______________________________________________
Shop-talk@autox.team.net
Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net/archive
--===============2141529244465818957==--
|