... for the purposes of mounting rotoflex parts to Spit frames on
GT6/Spit conversions, I took some measurements today, and have made up a
one page pdf which shows reasonable close locations of the upper shock
mount above the rear spring pocket in the body, a fairly close dimension
for locating the radius rod brackets, and added a dimension to the
existing frame drawing in the factory manual, to locate the rotoflex
lower wishbone brackets on the frame.
Email me, and I'll send out a copy to you.
Cheers.
--
Michael D. Porter
Roswell, NM (yes, _that_ Roswell)
[mailto:mporter@zianet.com]
`70 GT6+ (being refurbished, slowly)
`71 GT6 Mk. III (organ donor)
`72 GT6 Mk. III (daily driver)
`64 TR4 (awaiting intensive care)
`80 TR7 (3.8 liter Buick-powered)
`86 Nissan 300ZX (the minimal-maintenance road car)
`68 VW Type II Camper (Lancia twin-cam powered, but feeling its age....)
Remember: Math and alcohol do not mix... do not drink and derive.
|