Mike:
In the JC Whit catalog, they sell polyurethane sway
bar bushings with new u shaped brackets to go over the
bushings. The u brackets have slotted holes and come
in two sizes to match your frame hole pattern.
Don't cut your frame mounting plates off (but do check
them for cracks, mine had some...)
Jason
GT6
-----------------------------------------------------
Subject:
Has anyone put a larger anti roll bar on their
Spitfire or GT6 and
found they had to refabricate the mounting plate onto
which it
attaches to the frame? I just checked mine and find
that the mounting
bracket bolt holes are spaced too far apart to use the
stock mounting
plate on the frame. Before cutting the old plates off
and welding on
new ones, I thought I'd ask for input from anyone
who's already done
this.
TIA,
Mike Ross
Get email at your own domain with Yahoo! Mail.
http://personal.mail.yahoo.com/
|