With standard house wall fiberglass insulation underneath
... I basically 'wallpapered' the underside of the tranny tunnel
with aluminum foil and aluminum duct tape.
I've never had any of it come loose. or absorb or hold any water
I've done this on all four of the last Spits I owned
with great success.
Paul Tegler email@example.com www.teglerizer.com
----- Original Message -----
From: "mark holbrook" <firstname.lastname@example.org>
Sent: Wednesday, June 13, 2001 3:37 PM
I don't think the last email I sent out went, but if
it did just ignore this email. I am looking for a
good insulator that will stop the heat/cold coming
through the trans tunnel area. It has to be weather
resistant as it will be exposed to water when it rains
because I will put it where the existing old
insulation is, under the trans tunnel. any ideas?
Get personalized email addresses from Yahoo! Mail - only $35
a year! http://personal.mail.yahoo.com/
/// email@example.com mailing list
/// To unsubscribe send a plain text message to firstname.lastname@example.org
/// with nothing in it but
/// unsubscribe spitfires