Assuming you install appropriate high-tension leads, the limit will be
the voltage that distributor and rotor can withstand before breaking
down and tracking. .060 at the plug will require about 60kV -- that's
a lot of voltage for 1950's-1960's technology ignition components.
Donald.
> From: Rick Gregory <Rick@ncmg.com>
> Date: Wed, 21 Aug 2002 08:53:07 -0600
>
> Dave - I believe I had read somewhere that the gap could go to .060 with a
> high voltage coil to utilize the improved spark performance, but I too would
> like confirmation from someone who has tried & tested it. Please let me know
> if you get any feedback on this that doesn't make it to the list.
>
> Rick Gregory
>
> -----Original Message-----
> From: Dave Chu [mailto:dave@ece.concordia.ca]
> Sent: Tuesday, August 20, 2002 8:47 PM
>
>
> I've been running my Spit and a sports coil with the plugs gap at .035".
> How wide can the plugs be gap with the sports coil?
>
> Dave |\ | | |
[snip]
/// spitfires@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|