Not necessarily. If the bearing is loose the vibrations might cause noise
that is stopped when the bearing contacts the pressure plate fingers. But
in most situations, you are probably right.
Joe
-----Original Message-----
From: triumphs-bounces@autox.team.net
[mailto:triumphs-bounces@autox.team.net] On Behalf Of Jim Muller
Sent: Wednesday, June 09, 2010 6:18 PM
To: Triumphs@autox.team.net; Spitfires@autox.team.net
Subject: Re: [TR] a rough week for cars
On 9 Jun 2010 at 16:33, Joe Curry wrote:
> Jim, If you are fortunate it might only be the throwout bearing.
Joe, don't I wish you were right. But the TO bearing would stop
making noise, not start, when I release the clutch. And with the
clutch depressed and the car rolling it wouldn't start making noise
whenever I engage any gear, and stop when I put it back into neutral.
--
Jim Muller
jimmuller@rcn.com
'80 Spitfire, '70 GT6+
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe: http://autox.team.net/mailman/options/triumphs/spitlist@cox.net
_______________________________________________
Spitfires@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|