To clarify, you are referring to rubber spacers involving the bolts that hold
the fuel tank together? Guess I need to do some part hunting for something
suitable.
----- Original Message -----
From: "Joe Curry" <spitlist@cox.net>
To: s1500@comcast.net, spitfires@autox.team.net
Sent: Friday, June 11, 2010 10:18:32 AM GMT -06:00 US/Canada Central
Subject: RE: [Spits] New tank - slight hitch
Not only can you fit spacers, but you should. I would recommend that they
be made of rubber to absorb vibrations to keep the thing from shaking the
seams and self destructing.
Joe
-----Original Message-----
From: spitfires-bounces@autox.team.net
[mailto:spitfires-bounces@autox.team.net] On Behalf Of s1500@comcast.net
Sent: Friday, June 11, 2010 5:32 AM
To: spitfires@autox.team.net
Subject: [Spits] New tank - slight hitch
With some elbow grease, I got the new fuel tank in, but with one hitch.
Always a hitch with new parts.
The Fuel filler cap doesn't fit on quite right. At best, it sticks out a
third of an inch from where it should be. It seems the fuel filler neck on
the tank is a bit far forward. Did my best to fit things together so as to
no fuel leaks when I fill-up, but I think I can do better. I'm not sure if
the neck is exactly advanced forward a bit too far, or at some weird angle
_______________________________________________
Spitfires@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|