Unfortunately I had to drill out and destroy all of the ones on my car. I
should have taken some close-up photos first...
I have some interesting rivets I bought once, at a hardware store
going-out-of-business sale. The bottom end
is sealed, so there is no path for moisture to pass through the center
hole. I might use those.
Doug
On Sun, Oct 28, 2012 at 9:54 PM, Andrew S. Mace <zoboherald@aol.com> wrote:
> I think the only significant difference is that original rivets tended
> to be steel, while those more commonly available from hardware stores
> tend to be aluminum. At least that's what I remember, not having done this
> in quite some time.
>
> --Andy Mace
_______________________________________________
Spitfires@autox.team.net
Archive: http://www.team.net/archive
|