Bleeding spridget clutches is at best a mystical excercise! Repeated
bleeding
with a good spritely drive in between seems to be the only sure way of
getting
it right. Be very careful changing gears on the first time out.
I've heard that replacing the lower half of the bundy tubing (down to the
slave cylinder)
helps. I've done this on the racecar and I am not sure it is significantly
better in this
regard (it is a *huge* godsend at every engine/gearbox pull).
----------------------------------------------------------------------------
--------------------------------------
Mike Gigante mikeg@vicnet.net.au
Watsons Creek Vineyard http://www.vicnet.net.au/~mikeg
----------------------------------------------------------------------------
--------------------------------------
|