Re: Sppedo face removal

[Frank Clarici <spritenut@Exit109.com>]

Ron Soave wrote:

> How do you remove the dial face of a bugeye speedo?  The needle either has
> to come off or the center shaft does, with no obvious way to do either.
>

Ron

Remove the 2 tiny screws on the speedo dial face plate.
Carfully repeat CARFULLY and evenly pull out the face plate while gently
wobbling it from side to side, this will pop off the needle.
Do not use pliers or such to pull the needle, it will bend.
Do not use too much force on the face plate it to will bend.
Be patient, wiggle it just a little bit and gentle pull. It will come off.

Good luck
Frank


--
Frank Clarici
Too many Sprites
http://www.exit109.com/~spritenut