Vllas wrote:
>
> hi.
>
> on my bugeye the fuel line between the carbs is made of solid tubing and is
> attached tothe top of the intake manifold by two bolts. the heater line, also
> made of metal, seem to want to be attached to the same bolts. the clips are
> there in both lines but i can't see hoe they can be both attached to the same
> two bolts on top of them manifold.
>
> am i routing them incorrectly? what am i doing wrong if anything?
> thanks for the help.
>
> dave, i promptly and accidentally erased your last message. please send again.
>
> alex
I have a Midget Mark I engine/carb setup on my bugeye, but the line
between the carbs is flexible. I just replaced it with a nice one from
MiniMania.
The two clips for it are mounted to the upper carb stud, not on the
manifold with the heater hose.
Chas Douglass -- Seattle WA
|