Mine is mounted just in front of the heater unit, in the center of the
engine compt.My car is a midget, So I dont know if they are identical.
One lead comes around the drivers side of the heater, the one from the
switch goes streight down to the starter. Carl E.
-----Original Message-----
From: Daryl May <mayfam@sprynet.com>
To: spridgets@autox.team.net <spridgets@autox.team.net>
Date: Wednesday, April 29, 1998 8:39 PM
Subject: Solenoid Hookups
>I am restoring my Bugeye from a carcase and some 1967 Midget parts, so
>please help with some "how does it fit, where does it go" questions.
>
>I want to install the Midget starter solenoid, using a Midget starter motor
>and an aftermarket ignition switch. the solenoid is roughly cube-shaped
>with 2.5 inch sides. Looking down on the connector-side, with the
>attachment flange on the side furthest away from me pointing down, the
>solenoid can be described by the points of the compass (north dead ahead):
>
>The North (large) connector goes to the starter motor +ve???
>The East (small) connector goes to the ignition switch start position
>(+ve)???
>The South (large) connector goes to battery +ve???
>The flange earths on the car body where it attaches???
>
>Please confirm or CORRECT these suspicions.
>
>THANKS!
>
>Daryl
>
|