spridgets
[Top] [All Lists]

Re: rough running midget

To: robert weeks <robert@woozy.com>
Subject: Re: rough running midget
From: Valentine <valntine@postoffice.ptd.net>
Date: Sat, 23 May 1998 01:05:18 -0400
Cc: mgs@Autox.Team.Net, spridgets@Autox.Team.Net
References: <v03007801b18be19f721f@[206.240.43.80]>
Reply-to: Valentine <valntine@postoffice.ptd.net>
Sender: owner-spridgets@Autox.Team.Net
Robert,

I had a similar problem, turned out to be the rivited connection of the
spade terminals on the coil.

When cold they were relatively tight, but when it warmed up they were
loose enough to loose conductivity.

I used Frank C's remedy;  Tap the rivets with a punch to draw them
tight.  It has been fine ever since.

Kevin Valentine

<Prev in Thread] Current Thread [Next in Thread>