Dave,
I have had this happen to me on my '68 Midget. Check the bolts holding the
starter on. They sometimes work themselves loose.
Dick Watson
I
-----Original Message-----
From: Dave Hiley <dhiley@cadvision.com>
To: spridgets@autox.team.net <spridgets@autox.team.net>
Date: Saturday, November 21, 1998 10:25 AM
Subject: Starter Malfunction
>Hello everybody,
>
>Today is an unusually warm (8 celcius) November day in Calgary so I decided
>to take the yellow snorting beast out and try to get the last 40 miles I
>need to make 500 on the rebuild.
>
>It started perfectly, ran well etc so I shut it off, put up the top and
>went to start it again to continue the warm up process.
>
>The starter just spins and does not engage. I had it rebuilt by a
>reputable local shop before I put it back on.
>
>I would assume that removal and return to the starter shop is the answer
>but would like to confirm that.
>
>tia
>dave
>
>
>
|