spridgets
[Top] [All Lists]

Re: Smiths Oil Press/Water Temp Gauge

To: dingram@tnet.net (Doug Ingram), Ulix Goettsch <ulix@u.washington.edu>
Subject: Re: Smiths Oil Press/Water Temp Gauge
From: Peter <nosimport@mailbag.com>
Date: Fri, 11 Dec 1998 08:18:16 -0800
Cc: spridgets@Autox.Team.Net
In-reply-to: <199812110543.VAA06874@carver.pinc.com>
Reply-to: Peter <nosimport@mailbag.com>
Sender: owner-spridgets@Autox.Team.Net
To all, if you don't know yet, the application for GD1307/01 is Midget
3/'68 - '72. Equivalent to BMC BHA4824. I can supply part numbers for the
whole range if desired.
HTH    Peter C
---------------
At 09:43 PM 12/10/98 -0800, Doug Ingram wrote:
>Hi Ulix:
>
>Assuming yours is a HAN9, and according to Horler, the correct gauge would
>have a Fahrenheit scale, unless it was built for the home (i.e. British)
>market, in which case it would have the C-N-H scale. The gauge I have
>available is the latter. Reading and rereading Horler, I can't find the
>Smiths number. Maybe someone else on the list can help.
>
>Doug Ingram
>Victoria BC
>1958 Frogeye
>AN5L/636
>
>>Doug,
>>my gauge just broke.
>>If yours turns out to be the correct one for my car, I would be
>>interested.
>>I believe that until 67, the temp gauge had C-N-H on the dial, while in 68
>>or so, numerical temperature markings were used.  I would prefer one with
>>numbers.
>>
>>    Ulix                                                    __/__,__        
>>.......................................................... (_o____o_)....


<Prev in Thread] Current Thread [Next in Thread>