Re: Mini Mania engine breather

[Paul A Asgeirsson <pasgeirsson@juno.com>]

On Thu, 4 Mar 1999 21:06:08 -0800 (PST) Ulix Goettsch
<ulix@u.washington.edu> writes:
>On Thu, 4 Mar 1999, Bruce Woodward wrote:


>> what is the 3/4" diameter pipe turned downward on the front lifter 
>cover on
>> my 10CG motor?

1098 engines had several diferent systems on them.

1.  A breather pipe going essentially straight down from the front lifter
cover.
2.  A breather pipe that made a loop upwards before going straight down.        
3.  An oil condensor coming out of the front lifter cover that had a hose
going to a PCValve on the intake manifold.

Sounds like you have the first one above.

Paul
Morriservice
PAsgeirsson@juno.com