Re: offset bushings

[Ulix Goettsch <ulix@u.washington.edu>]

FWIW,
I have the offset upper bushings and with stock springs still had positive
camber.  I have since lowered the car 1" and I don't think I have much
negative camber if at all.  I am using polyurethane lower (non offset)
bushings.

Ulix

On Tue, 9 Mar 1999 Lancer7676@aol.com wrote:

> In a message dated 3/9/99 1:17:29 PM EST, redfish@premier.net writes:
> 
> << With the top offset bushings
>  and the car lowered 2" with the springs I get about 3 deg. of neg. camber. >>
> 
> How is tire wear with these offset bushings?  Or are we talking STRICTLY
> racing where it doesnt matter as much as road driving?
> 
> ---David
> 

    Ulix                                       __/__,__      ___/__|\__  
..............................................(_o____o_)....<_O_____O_/...
                                              '67 Sprite     '74 X1/9