Crash,
See my resonse to Frank for my PVC setup.
Thanks for the tip about the dye, that sounds like my best bet right now.
regards - Bryan
>X-MSMail-Priority: Normal
>X-Priority: 3
>To: "Bryan Vandiver" <Bryan.Vandiver@eng.sun.com>
>Cc: spridgets@autox.team.net
>MIME-Version: 1.0
>Subject: Re: 1275 oil pressure
>Content-Transfer-Encoding: quoted-printable
>
>Bryan, Go to your machine shop and get some dye to put in the engine. Then
clean the bottom real good and put the dye in and using a black light crawl
under the car and watch the oil leak out. Best bet is to see Franks message
about the PCV.
> Crash
>
|