spridgets
[Top] [All Lists]

oil filler cap: to vent or not to vent

To: spridgets@autox.team.net
Subject: oil filler cap: to vent or not to vent
From: Jeff Boatright <jboatri@emory.edu>
Date: Sun, 14 Nov 1999 12:06:27 -0500
Reply-to: Jeff Boatright <jboatri@emory.edu>
Sender: owner-spridgets@autox.team.net
Spridgeteers,

The 1275 in my Mk3 Sprite came with a vented oil filler cap and no 
PCV system (i.e., no tube from the front separator/breather on the 
timing chain cover, no valve sitting on top of the intake manifold). 
I've now added a cobbled PVC system and was wondering if I need to 
switch to a non-vented oil filler cap. That is, what did the 1275 
egnines with PVC valves connected to the middle of the intake 
manifold have: vented or unvented caps?

TIA,

Jeff
Jeffrey H. Boatright, PhD
Senior Editor, Molecular Vision
http://www.molvis.org/molvis
"Seeing the Future in a Very Tiny Way"

<Prev in Thread] Current Thread [Next in Thread>