Larry,
Thanks for the recommendation, and web info.
Regards - Bryan
P.S. - Now I just need to find a 3/4" MC.
>To: "Spridgets" <spridgets@autox.team.net>
>Subject: Re: 7/8 inch dual master needed
>MIME-Version: 1.0 charset="iso-8859-1"
>X-Priority: 3
>X-MSMail-Priority: Normal
>X-Mimeole: Produced By Microsoft MimeOLE V5.00.2919.6600
>
>I've had a 3/4 and a 7/8 sleeved by Joe. He does good work.
>
>Sierra Specialty Automotive
>3494 Chandler Rd. Quincy, CA 95971
>(800) 4-BRASS-1 or (530) 283-1886
>FAX: (530) 283-4845
>E-mail: joe@restoresource.com
>
>http://www.restoresource.com/
>
>Larry Miller
>
>
>----- Original Message -----
>From: "David Ramsey" <dwramsey@worldnet.att.net>
>To: "Bryan Vandiver" <Bryan.Vandiver@Eng.Sun.COM>
>Cc: <spridgets@autox.team.net>
>Sent: Tuesday, January 25, 2000 12:22 PM
>Subject: Re: 7/8 inch dual master needed
>
>
>> Bryan, I checked my spares and have two 7/8" masters but no 3/4" ones,
>> bummer. I have never had one resleeved, but understand that there is a
>> place in Quincy, Calif. (Sierra specialties?) that does it. Might want to
>> check with the list or the Archive.
>> Crash
>>
>>
>> >Crash,
>> >
>> >Thanks - Bryan
>> >
>> >BTW - have you ever had a MC resleeved??? if so do you have a recommended
>> >service??
>>
>>
>>
>
|