You can make the rod as long as needed. You could also try Frank's method of
placing a nut behind the rod in the cylinder.
LM
----- Original Message -----
From "wizardz" <wizardz at maxinter.net>
To: <spridgets@autox.team.net>; <mgs@autox.team.net>
Sent: Thursday, March 02, 2000 9:05 AM
Subject: clutch pin length
> There are two different lengths of pins from the clutch slave cyl
> to the fork rod for the 948/1098 vs the 1275.
>
> Does anyone know how much different in length they are?
>
> I am beginning to suspect I have a pin that is too short forcing my
> slave cyl. to be near the end of its bore just to get the
> clutch engaged.
>
> A new clutch, fork and pivot bearing, throwout bearing, slave cyl.
> and it still seems like I don't have enough throw to the cyl.
>
> Can I swap one length pin for the other?
>
>
> Paul Tegler wizardz@toad.net http://www.teglerizer.com
> OBie - '73 BGT - daily driver
> http://www.teglerizer.com/mgstuff/ob_description.htm
> Punkin' - '78 Spitfire - corner ripping screamer
> http://www.teglerizer.com/triumphstuff/spit78.htm
> Lil' Greenee - '73 RWA Midget - lady killer
> http://www.teglerizer.com/midgetstuff/index.html
>
>
|