We've been this way before...
The MGB wheels have a deeper spline. They will fit but you will only be able
to catch a thread or two of the knock-off.
Very dangerous... I wouldn't even think about running this combo.
Don't believe everything you read in the M**s catalogue.
Richard
At 03:05 PM 3/24/00 -0600, you wrote:
>On the 14" centerlock alloy wheels, the Moss catalog lists the same part
number
>(455-360) as both the standard MGB wheel and the "plus one" fitment for the
>Midget so I would think so.
>
>Phil Vanner
>Mk1 Midget
>
>On Friday, March 24, 2000 8:45 AM, wizardz [SMTP:wizardz@maxinter.net] wrote:
>> Does anyone know what if any differences there are
>> (obviously the diameter) between the spline/hub sizes of a 14" wire wheels
>> (MGB?)
>> and a 13" (Midget) wire wheel?
>>
>> In other words would MGB wires (14") fit a Midgets hubs correctly?
>>
>> Paul Tegler wizardz@toad.net http://www.teglerizer.com
>> OBie - '73 BGT - daily driver
>> http://www.teglerizer.com/mgstuff/ob_description.htm
>> Punkin' - '78 Spitfire - corner ripping screamer
>> http://www.teglerizer.com/triumphstuff/spit78.htm
>> Lil' Greenee - '73 RWA Midget - lady killer
>> http://www.teglerizer.com/midgetstuff/index.html
>
|