The NAPA # for the screw connector stop light switch is SL144, for the
Lucar connector it's SL147. Both of these are the hydraulic types.
Paul A
FROM: INTERNET:Jpp963 at aol.com, INTERNET:Jpp963@aol.com
TO: spridgets, INTERNET:spridgets@autox.team.net
(unknown), INTERNET:chaz2@gis.net
DATE: 7/18/00 10:53 PM
Re: Re: Geo Metro Radiator conversion
In a message dated 7/18/00 9:13:11 PM Eastern Daylight Time, chaz2@gis.net
writes:
<< The brake lights are not working- Are the pressure switches reliable? >>
If you want to try a new switch NAPA carries a Ford switch that will work
-
part # SL134. You will need to change terminals on your wiring harness to
snap types but this switch is probably more reliable than the "Made in
Taiwan" replacements available from the usual suspects.
Pete G.
Southington, CT
----------------------- Internet Header --------------------------------
Received: from teamfat2.dsl.aros.net (teamfat2.dsl.aros.net
[207.173.21.42])
by spdmgaaa.compuserve.com (8.9.3/8.9.3/SUN-1.9) with ESMTP id
WAA24714
for <PAsgeirsson@compuserve.com>; Tue, 18 Jul 2000 22:53:23 -0400
(EDT)
Received: (from majordom@localhost)
by teamfat2.dsl.aros.net (8.9.3/8.9.3) id UAA08401
for spridgets-actors; Tue, 18 Jul 2000 20:34:43 -0600 (MDT)
From Jpp963 at aol.com
Date: Tue, 18 Jul 2000 22:33:52 EDT
Subject: Re: Geo Metro Radiator conversion
To: chaz2@gis.net, spridgets@autox.team.net
|