When I used the total seal rings, they asked for all of the measurements
from the piston, like groove width, etc. Since I was over my head, I handed
the piston to the parts guy (a very knowledgeable friend) and said, "order
the rings I need".
David Riker
74 Midget
63 Falcon
70 Torino
http://home.pacbell.net/davriker
----- Original Message -----
From "Ulix Goettsch" <ulix at u.washington.edu>
To: "spridgets" <spridgets@autox.team.net>
Sent: Tuesday, February 06, 2001 5:13 PM
Subject: Total Seal gapless rings for 1380cc pistons
> On my second time around building this engine, I want to use gapless
rings.
>
> 1) Can anyone tell me the part numbers for Total Seal gapless rings that
> fit the Hepolite (not Omega) 73.5mm pistons?
>
> 2) Do I need to get top rings and second rings, or just top rings?
>
> Thanks,
> Ulix __/__,__ ___/__|\__
> ..............................................(_o____o_)....<_O_____O_/...
> http://www.mirafiori.com/~ulix/ '67 Sprite '74 X1/9
|