spridgets
[Top] [All Lists]

Re: Rear hub part numbers

To: <Daniel1312@aol.com>, <midgetsprite@egroups.com>, <spridgets@autox.team.net>
Subject: Re: Rear hub part numbers
Date: Thu, 7 Jun 2001 07:26:47 +0100
References: <e6.169166c9.284fb572@aol.com>
Early (and some Minor ones) didn't have that rubber O-ring?  Still doesn't
explain why I had the drums fouling the backplates and the bearing carriers
fouling the wheel cylinders.

----- Original Message -----
From <Daniel1312 at aol.com>

> The hubs are the same for steel or wire wheels - just the length of the
studs
> are different.  Weren't the early hubs changed to the later design to
> increase strength - a result of a competition failure?
>
> Daniel1312
>
> In a message dated 06/06/01 04:26:48 Pacific Daylight Time,
> rob@thomasr.greatxscape.net writes:
>
> << I'm thinking that there may actually be a
>  slight difference in the construction of the BTA (Wire Wheel) ones. >>



<Prev in Thread] Current Thread [Next in Thread>