Just thinking out loud... Anybody ever try some 20 to 30 mil thick clear
vinyl on the inside of their cabinet covering the window?
Kent
Subject: Re: More Sandblast cabinet suggestions requested (the topic I won't
let die!...
> I use a layer of clear packing tape over the window. Very easy and cheap
to
> replace when it clouds.
>
> Dave Camp
> Subject: Re: More Sandblast cabinet suggestions requested (the topic I
won't
> let die!...
>
>
> > In a message dated 10/3/2001 2:37:07 AM Eastern Daylight Time,
> > guy@weller-lakes.freeserve.co.uk writes:
> >
> >
> > > Glass eventually goes cloudy but is easy to replace.
> >
> > You can get a sheet plastic to stick on the inside of the glass to
extend
> > it's life. I have never used it, but it seems like it might work. When
> the
> > plastic gets cloudy you pull it off and put on another piece. Another
> idea,
> > from one who has never BTDT might be to cut a very thin piece of
> plexiglass
> > and install it on the inside of the glass. Replace it when it pits up?
> Just
> > pondering.
> >
> > --David C.
|