spridgets
[Top] [All Lists]

Re: Confused

To: "Larry Macy" <macy@bbl.med.upenn.edu>, "Kevin & Kathy Valentine" <valntine@ptd.net>, "Spridgets" <spridgets@autox.team.net>
Subject: Re: Confused
Date: Mon, 5 Aug 2002 07:38:38 -0700
References: <B9740176.EC78%macy@bbl.med.upenn.edu>
Try British Wiring at http://britishwiring.com/

----- Original Message -----
From "Larry Macy" <macy at bbl.med.upenn.edu>
To: "Kevin & Kathy Valentine" <valntine@ptd.net>; "Spridgets"
<spridgets@autox.team.net>
Sent: Monday, August 05, 2002 7:18 AM
Subject: Re: Confused


> Hmmmm, could be ;-)
>
> I think I have likely fused a few wires in the wiring harness. The dash
part
> I would guess (Moss Part #  356-988). The car is getting juice to the
white
> wire from someplace. The white wire splits at the connector for the
ignition
> switch. With this wire hot, the lights work and the car runs. Even if you
> disconnect the plug that connects the switch to the wiring harness. Since
> the problem started when the circuit breaker was in the fuse box, I
suspect
> I overheated the light circuit and melted something that now connects the
> lights and ignition to a always on (brown) wire. The logical place is in
the
> dash section of the harness.
>
> Now any one have any experience with the Moss harness? Or got another
place
> I can order one from?? I seem to recall another place, but don't remember
> for sure.

///  unsubscribe/change address requests to majordomo@autox.team.net  or try
///  http://www.team.net/mailman/listinfo
///  Archives at http://www.team.net/archive/spridgets


<Prev in Thread] Current Thread [Next in Thread>