spridgets
[Top] [All Lists]

Re: engine paint

To: Dbcooper292@aol.com
Subject: Re: engine paint
Date: Sun, 05 Jan 2003 20:10:17 -0800
Cc: spridgets@autox.team.net
Organization: Morriservice
References: <143.6f568c2.2b4a553d@aol.com>
Hi Mark,

Bummer on not getting a "New" type repair on your Volvo.

This 500 degree will be OK for the block, but the exhaust headers will need the
1500 degree paint.  I've had good success with this high temp paint on newly
sandblasted manifolds.

Paul A

Dbcooper292@aol.com wrote:

> I have some engine enamel that says it's good for 500 degrees.  Will this
> stuff hold up on a header?
>
> Mark M.
>
> PS picked up the Volvo after aforementioned annihilation at hands of seizure
> ridden senior, one month and 15000 dollars and it is really nice but not
> quite like new.  Anyway there was an MGC in the shop (front end collision
> resulting from brake failure)  It has the hood bulge I expected (wide and
> low) plus a little second bulbous one on the right side looking at the front.
>  opened the hood and this clears the dashpot on a second carb.  Was this the
> way they came?  some reason I didn't remember the second bulge.

///  unsubscribe/change address requests to majordomo@autox.team.net  or try
///  http://www.team.net/mailman/listinfo
///  Archives at http://www.team.net/archive/spridgets


<Prev in Thread] Current Thread [Next in Thread>