spridgets
[Top] [All Lists]

Re: Oil pressure gauge help

To: <spridgets@autox.team.net>, "James Dowling" <jimdinalameda@hotmail.com>
Subject: Re: Oil pressure gauge help
Date: Thu, 3 Apr 2003 13:53:14 -0500
Oh, and one other thing - I think the anti-run-on valve is electrically 
connected to the oil pressure sender for the idiot light, so if you have that 
still installed and working, you may want to use the T junction for the gage I 
described.

-=Chris


Chris King   - cbking@alum.rpi.edu
http://mywebpages.comcast.net/kvcbk/
               


---------- Original Message ----------------------------------
From "Chris King" <cbking at alum.rpi.edu>
Date:  Thu,  3 Apr 2003 13:50:09 -0500

>The oil pressure gauge can screw into the spot under the dizzy where the oil 
>pressure sender now is. It's a 3/8 fine thread, which is also a 1/8" pipe 
>thread.
>
>I'm going to use a separate oil pressure gage from a '79 MGB. If you want to 
>keep the idiot light (as I am), you can get a T and some other bits from Pep 
>boys, Home Depot, etc. and plug the pressure sender in one end and the gage 
>tube in the other. Pep Boys sells a Sun-pro gage hook-up kit that has 
>everything you need to plumb the gage. It's about $6 or so for the kit. 
>
>Someone else may have to help with the temp gage info. I think you need a 
>specer for the themostat housing to use the old mechanical temp gage.
>
>-=Chris
>'79 Midget
>
>Chris King   - cbking@alum.rpi.edu
>http://mywebpages.comcast.net/kvcbk/
>               
>
>
>---------- Original Message ----------------------------------
>From: "James Dowling" <jimdinalameda@hotmail.com>
>Reply-To: "James Dowling" <jimdinalameda@hotmail.com>
>Date:  Thu, 03 Apr 2003 10:12:48 -0800
>
>>Can anyone tell me how I would install an oil pressure gauge on a 1500 
>>engine. I am thinking of getting a combo oil pressure/water temp gauge to 
>>replace the original water temp. Also, can I just change the water temp 
>>sending unit form electrical to manual?
>>TIA,
>>Jim
>>79 Midget

///  unsubscribe/change address requests to majordomo@autox.team.net  or try
///  http://www.team.net/mailman/listinfo
///  Archives at http://www.team.net/archive/spridgets


<Prev in Thread] Current Thread [Next in Thread>