Air-powered grease gun.
>From: "Chris King" <cbking@alum.rpi.edu>
>Reply-To: "Chris King" <cbking@alum.rpi.edu>
>To: <spridgets@autox.team.net>
>Subject: Caliper rebuild question
>Date: Wed, 7 May 2003 08:42:49 -0400
>
>2 calipers, 4 pistons. Only 1 came out under 90 psi air pressure. 3 others
>moved, but are still stuck in the bores. Of the 3, 2 I can probably whack
>out with a tool inserted in the banjo connection hole.
>
>Any good ways to get the last one out? I'm replacing all 4, since they're
>only about $10 each, so destructive methods (to the pistons) are also
>welcome.
>
>-=Chris
>
>Chris King - cbking@alum.rpi.edu
>http://mywebpages.comcast.net/kvcbk/
>
_________________________________________________________________
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/spridgets
|