my car and the schematic in my manual do have some similarities, but leave a
few questions too. On my tach there's a power lead to the light, a green and
white/black wire, and a group of three black wires (grounds it seems) attached
to one of the mounting posts. This is all represented in the manual, but the
yellow wire is not. It connects to the tach housing itself with a spade
connector and I assume it is a (nother) ground because of that, anyone familiar
with this?
Mark M.
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/spridgets
|