spridgets
[Top] [All Lists]

RE: Re[2]: dwell tach, tach, measured speed. 09:36:02 -0500

To: John.Deikis@med.va.gov
Subject: RE: Re[2]: dwell tach, tach, measured speed. 09:36:02 -0500
Date: Thu, 26 Jun 2003 12:16:41 -0400 (EDT)
Cc: pythias@pacifier.com, John.Deikis@med.va.gov, spridgets@autox.team.net
well, John...

Looks like www.nisonger.com could probably help you out with this in any
case, especially if you can tell them where
in the range your tach is off and by approx. what amount.

Of course the important thing is you knowing where the engine really is,
rpm-wise, towards the top.

Maybe it was always this way (to one
extent or another?) before the PerTronix
was ever installed?




Cap'n. Bob 
     '60 :{)

///  unsubscribe/change address requests to majordomo@autox.team.net  or try
///  http://www.team.net/mailman/listinfo
///  Archives at http://www.team.net/archive/spridgets


<Prev in Thread] Current Thread [Next in Thread>
  • RE: Re[2]: dwell tach, tach, measured speed. 09:36:02 -0500, Unknown <=