66Sprite wrote:
> How does one go about removing the roll-up window mechanism from the inside
> of the doors (65 thru 68 Spridgets)?
Remove the wing window complete with frame, 2 bolts on the inside top
edge of the door, 2 nuts under the frame, and a funky clip way down low
on the frame.
Next remove all the window mechanism bolts from the door, if you have
the chrome window hanfle, push in on the chrome spring loaded bezel and
drop out the pin holding the handle on, be careful as it is just help in
by the spring pressure of the bezel. Once everything is undone, the
window can be slid off the track with some choice words and all of a
sudden it's off, lift it out and the mechanism can be fished out of the
door in a similar manor.
It's easier to do than to explain, it just sort of pops out after you
fiddle with it.
--
Frank Clarici
Toms River, NJ
Down to just a few Sprites
http://www.exit109.com/~spritenut
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive
|