spridgets
[Top] [All Lists]

Re: 1275 fuel pump

To: Glen Byrns <grbyrns@ucdavis.edu>
Subject: Re: 1275 fuel pump
Date: Sat, 03 Jan 2004 20:37:37 -0800
Cc: BCAH@aol.com, spridgets <spridgets@autox.team.net>
References: <169.285747c2.2d28c94d@aol.com> <001301c3d270$02d3a220$5512eda9@internal.vgl.ucdavis.edu>
User-agent: Mozilla/5.0 (Windows; U; Win98; en-US; rv:1.4) Gecko/20030624 Netscape/7.1 (ax)
In looking at the NAPA web site, the Facet fuel pump is listed as a Beck 
Arnley part no. 1520568 and it retails for 74 bucks.  PartsAmerica.com 
lists the same pump for $54.  ! 1/2 to 2 1/2 psi inline electric pump.
Mike MacLean
60 Sprite

Glen Byrns wrote:

>I think the list wisdom is that the 948cc mechanical pump doesn't produce
>enough volume for the 1275cc.
>Try the little low pressure facet pumps from NAPA.  Cheap, long lasting,
>easy to install and plenty of flow for the 1275 no matter how built up.
>Glen
>
>
>  
>
>>Quick question.Can I take the mech fuel pump off my 948 and fit it to the
>>1275 engine? I got a chance to purchase a 1275 from a wreck and I see it
>>    
>>
>has the
>  
>
>>hole in the side of the block(which has a plate over it) for a mech pump.
>>    
>>
>I
>  
>
>>assume there would be a lobe on the cam to run this? The engine is from a
>>    
>>
>Midget
>  
>
>>with an elec fuel pump. Any thoughts, comments, rude remarks?  Bob C in KS






<Prev in Thread] Current Thread [Next in Thread>