spridgets
[Top] [All Lists]

RE: American Racing wheels

To: "Jim Baustian" <jabaustian@att.net>, <spridgets@autox.team.net> i42Mmlpq028679
Subject: RE: American Racing wheels
Date: Sun, 2 May 2004 16:48:20 -0700
Thread-index: AcQwcBuHcK7Tz6mcRJmcSfUQyzHhmAALmRMs
Thread-topic: American Racing wheels
Jim,
If they are 5" wide the offsett is probably correct. The backspacing should be 
4"- 4-1/2" to fit perfect. I am assuming the bolt pattern is 4 on 4". If not 
it's not all bad as the bolt pattern can be redrilled or slotted but it may not 
be cheap. My local place charges $30 per wheel.

If they're cheap, buyem'. If they're 4 on 4" buyem'. They're getting hard to 
find in our Sprite size. 

Herby
64 MKII Sprite (Herbytoy - patiently waiting)
62 MKII Sprite (the "resto-mod" driver)
billh@aaai.com
http://www.herbytoys.com <http://www.herbytoys.com/> 

        -----Original Message----- 
        From: Jim Baustian [mailto:jabaustian@att.net] 
        Sent: Sun 5/2/2004 11:05 AM 
        To: spridgets@autox.team.net 
        Cc: 
        Subject: American Racing wheels
        
        

        I recently ran across a set of American Racing wheels (Libre pattern). 
The
        size is 13 x 5. Will they fit our 65 MkIII Sprite?
        Jim B.






<Prev in Thread] Current Thread [Next in Thread>