In addition to what Frank said, pull the cable from the housing and lube it
with your favorite lubricant. I use plain old motor oil.
Larry Miller
http://www.ado13.com
----- Original Message -----
From "Frank Clarici" <spritenut at exit109.com>
To: "Antony" <antony@antgel.co.uk>
Cc: "Spridgets" <spridgets@autox.team.net>
> Remove the gas pedal, take off the 2 pivots, clean and lube those
> pivots. One grain of sand in one pivot will cause unbelievable throttle
> problems.
> 2 bolts up above the carpet, unhook the cable and pull it out of the car
> to clean and grease. There are 2 small cotter pins holding the pivots in
> place.
|