I agree on both points, with the addition that the pins may feel tight when
rotated 90 degrees, but always check for looseness with the components in
their usual attitude.
Peter C
==
At 04:02 PM 11/3/04, CHRIS KOTTING wrote:
>I'm not entirely clear on what you're describing here (is the assembly on or
>off the car, whatdo you mean by "on the ground", etc), but I'm thinking that
>any play you can feel with the assembly greased is too much.
>
>On Wed, 3 Nov 2004 10:20:51 -0800, Gerard wrote
> > I'm wondering how much play is normal/acceptable if an A-arm has a
> > new threaded fulcrum pin and new threaded inserts (king pin end of
> > A-arm), if they whole swivel axle is stationary (on the ground) and
> > you hold the A-arm by the wide end?
> >
> > Gerard
|