Or you can build your own for $20 or so.
http://www.bmw-m.net/TechProc/bleeder.htm
----- Original Message -----
From "Allen Hefner" <ajhsys at gmail.com>
To: <KrkLH@cs.com>
Cc: <stevenm@optonline.net>; <spridgets@autox.team.net>
Sent: Friday, May 27, 2005 12:50 PM
Subject: Re: brake project ahead
> If you must get one of these, check out this one on eBay.
> http://tinyurl.com/7owcd
>
> Allen Hefner
> Norristown PA
>
>
>
> On 5/27/05, KrkLH@cs.com <KrkLH@cs.com> wrote:
>> I am using a presurrized bleeder that takes pressure from your tire to
>> pressure up the master cyl. Works like a charm - and all I have to do is
>> walk the
>> car starting at the furthest brake nipple and make my way around all of
>> the
>> bleed points letting it bleed.
|