Hey guys,
C'mon, if you widened and lengthened a Midget, you would have an MGB......
Inskip, the East Coast BMC Distributor, custom built 12 MGTD four-place tourers
in the early 1950s by adding some length to the frame and making longer doors
and filling in the rocker panel at the bottom. The same thing could be easily
accomplished by using two old Spridget shells (I know of a solid shell in Simi
Valley) and then one would only have to work on the doors - If ya really need
more cylinders, a GM 3.4 V6 crate mill would probably fit into the stock hole.
It might look a bit like a Dashoung (sp - A long German dog) but would give
more room inside and ride smoother at the expense of some agility.
Cheers,
Rick Feibusch
Venice Beach, CA
|