spridgets
[Top] [All Lists]

Re: dies

To: "Wm. Severin Thompson" <wsthompson@thicko.com>, spridgets@autox.team.net
Subject: Re: dies
Date: Mon, 12 Dec 2005 08:46:52 -0500
References: <200512121300.jBCD0vJF017711@autox.team.net> rain.CC.Lehigh.EDU
Sender: owner-spridgets@autox.team.net
User-agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.7.2) Gecko/20040804 Netscape/7.2 (ax)
William,
It is two operations to produce a flanged hole in sheet metal, and I 
don't know of any tools to do it in one shot. You can use a knock out 
punch (Chassis punch to electronic types) to produce a clean distortion 
free hole, and then there are several options to flare it. Look to the 
aircraft suppliers such as Aircraft Spruce for two options. One is an 
expensive professional tool set of hole punches that can be reversed for 
the flanging, and they also have a cheap, hand tool with rollers that 
will work on a variety of hole sizes. I've never used that one but it 
looks like it would take some practice to be consistent. Most of us 
who've done it will custom make a punch and die on the lathe for 
whatever hole size we're going to use. It could be aluminum, or even 
hardwood if you not going to do too many.
http://www.aircraft-spruce.com/
John

Wm. Severin Thompson wrote:

>Anyone know of a source for dies to punch holes in sheet metal for
>lightening?
>
> 
>
>(Something that produces a nice radiused/strong hole in sheet metal)




<Prev in Thread] Current Thread [Next in Thread>