if it's a holley ? you might nedd to be seeking the right size discharge
nozzle or jet for the acelerator pump. the hoilleys i'm familiar with use
a diaphram type acelerator pump.
chuck.
> [Original Message]
> From: Lester Ewing <lewing@sport.rr.com>
> To: Allen Kramer <kramer.allen@comcast.net>; Robert E. Shlafer
<pilotrob@webtv.net>
> Cc: Spridget List <spridgets@autox.team.net>
> Date: 6/27/2006 9:33:27 AM
> Subject: Re: Judson help??
>
> Allen,
> I got a spring from Autozone and have it going from the triangular
> frame cutout in the driver's side wheelwell up the the carb. So far
> so good.
>
> Cap't, I do have a flat spot from idle to about 2500 revs. NOw what
> accelerator pump do I need? Also, what jet are you running (did you
> run). The rebuilt carb has one but I also have one from the carb
> that came with the set. Just looking for info.. speaking of which,
> does anyone have a favorite site for these carbs??
>
> Thanks all,
>
> Lester
>
>
> On Jun 26, 2006, at 8:23 AM, Allen Kramer wrote:
>
> > Lester,
> > I had to make a spring. The spring goes from the linkage up to the
> > air cleaner vent tube. I made a loop that fits around the tube then
> > pushed the hose onto the tube to keep the spring in position. I did
> > try to research how they did it originally but to no avail. Let me
> > know if you find the correct method.
> > Allen
|