Phil Nase wrote:
> I am trying to figure out how to fit a dual circuit MC in the BE. I know
> the top of the footwell needs to be cut but do I cut out just an area just
> for the widest part of the MC where the pedals pivot?
I have done it. A wiper motor from a 68> Spridget helps since it was
mounted on the inner fender.
The later pedal box cut is down hill and the top part will need a
sheetmetal filler.
I think I used the 2 lower mounting holes and went from there.
--
Frank Clarici
Toms River, NJ
|