spridgets
[Top] [All Lists]

Re: [Spridgets] New Genny problem

To: derf <derf247@gmail.com>
Subject: Re: [Spridgets] New Genny problem
From: "Linda Grunthaner" <grunthaner@gmail.com>
Date: Sun, 10 Jun 2007 17:33:09 -0400
Derf,
Thanks I figured it out while waiting, the belt had slipped off the lower
pulley on the engine. It was tough to get off which is where the smoke came
from. It is all together now and I even checked the output on the battery
well over 14 volts at high revs.
Thanks so much for your help.
She runs great now. If anyone wants my old genny it is not a threaded type
and a piece where the bold goes through on top near the fan broke off but I
used it as is all year and works fine. Free for the list just pay for
postage.
Happy Motoring,
Linda & Pinky : )

On 6/10/07, derf <derf247@gmail.com> wrote:
>
> If the water pump and genny turn freely by hand, then I would try
> tightening the belt again.  Get the tension on the belt to where you
> can't turn the fan blade easily by hand.  If you can turn the fan
> blade and it easily slips in the belt then the belt should be a little
> tighter.  Is is possible you didn't tighten all the bolts the first
> time?
> Cheers,
> Derf
>
> On 6/10/07, Linda Grunthaner <grunthaner@gmail.com> wrote:
> > Derf,
> > Should I readjust the genny so the belt is tight again and start up
> again? I
> > just don't want to break anything.
> > Lin
> >
> >
> > On 6/10/07, Linda Grunthaner <grunthaner@gmail.com> wrote:
> > > Derf,
> > > It smelled like rubber the genny turns and the fan turns by hand.
> > > Lin
> > >
> > >
> > >
> > > On 6/10/07, derf < derf247@gmail.com > wrote:
> > > > More info needed.
> > > > Is the genny locked up(won't turn)?
> > > > Could the water pump be locked up?
> > > > Smoke could be from genny internals or belt.  Did the smoke smell
> > > > "electrical" or like burned rubber?  Or, both?
> > > > What still turns and what doesn't.
_______________________________________________

Edit your replies

http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets

<Prev in Thread] Current Thread [Next in Thread>